Form 1 -  Use this form for Notice of Work; Application for a Certificate of Likely Compliance; Application for a Demolition Permit

Form 2 - Use this form for Notice of Work; Application for a Certificate of Likely Compliance; Application for a Building Permit

Form 3 - Use this form for Notice of Work; Application for a Certificate of Likely Compliance; Application for a Plumbing Permit

Form 4 - Use this form when applying for an Occupancy Permit

Form 5 - Use this form when applying for a Temporary Occupancy Permit

Form 6 - Use this form for a Notice for Proposed Protection Work

Form 8 - Use this form when applying for a Certificate of Substantial Compliance

Form 9 - Use this form when applying for a Permit of Substantial Compliance

Form 10 - Use this form for a referral to function control authority

Form 11A - Use this form for a Certificate of Likely Compliance - building work

Form 11C - Use this form for a Certificate of Likely Compliance - demolition work

Form 12 - Use this form for a Certificate of Final Inspection - building work

Form 13 - Use this form for an Occupancy Permit - building surveyor

Form 14 - Use this form as a Building Notice

Form 15 -  Building Order - building surveyor permit authority

Form 16 - Form to use for a Defective Building Work Order

Form 17 - Form to use for a Certificate of Substantial Compliance

Form 18 - Form to use for a building permit

Form 19 - Form to use for a Certificate of Likely Compliance - plumbing work and permit

Form 20 - Form to use for a Certificate of Completion - building work

Form 21 - Form to use for a Certificate of Completion - plumbing work

Form 22 - Form to use for a Plumbing Notice - permit authority

Form 23 - Use this form for a Plumbing Order - permit authority

Form 25 - Use this form for a permit of substantial compliance

Form 26 - Form to use for a Temporary Occupancy Permit

Form 27 - Form to use for an Emergency Order - General Manager

Form 32 - Form to use for a Demolition Order - General Manager

Form 35 - Form to use for a Certificate of the Responsible Designer

Form 36 -  Information for Permit Authorities on keep registers

Form 38 - Form to use for a Notice of Refusal to Start Work Authorisation - building work

Form 39 - Form to use for a Start Work Notification and Authorisation - building work

Form 41 - Use this form for a Request for Report from Chief Officer

Form 42 - Form to use to Request a Report from an Environmental Health Officer (applications for a Certificate of Likely Compliance or an Occupancy Permit)

Form 44 - Form to use for a Building Inspection Direction

Form 46 - Form to use for a Schedule of Maintenance - prescribed essential building services

Form 47 - Form to use for a Chief Officer Report

Form 48 - Use this form for a Chief Officer Occupancy Report

Form 49 - Form to use for an Environmental Health Officer report

Form 50 - Form to use for an Environmental Health Officer Occupancy Report

Form 51 - Form to use for a Building Certificate

Form 53 - Form to use for Notification of Intention to Install Heading Appliance

Form 54 - Form to use for Heating Appliance - Installation Compliance Certificate

Form 55 - Form to use for a Certificate of Qualified Person - assessable item

Form 57 - Form to use for an Application for a Building Certificate

Form 58 - Form to use for a Permit Document Endorsement

Form 60 - Form to use for a Start-Work Notification and Authorisation - plumbing work

Form 61 - Form to use for a Notice of Refusal to Start Work Authorisation - plumbing work

Form 64 - Form to use for a Plumbing Inspection Direction

Form 68 - Form to use for a Demolition Permit

Form 69 - Form to use for a Certificate of Final Inspection - demolition work

Form 70 - Form to use for a Certificate of Completion - demolition work

Form 71A - Form to use for a Standard of Work Certificate - building work

Form 71B - Form to use for a Standard of Work Certificate - plumbing work

Form 71C - Form to use for a Standard of Work Certificate - demolition work

Form 73 - Form to use for a Start Work Notification and Authorisation - demolition work

Form 74 - Form to use for a Notice of Refusal of Start Work Authorisation - demolition work

Form 75 -  Form to use for a Demolition Inspection Direction

Form 76A - Form to use for an Application for Extension of Duration of Building Permit

Form 76B - Form to use for an Application for Extension of Duration of a Plumbing Permit

Form 76C - Form to use for an Application for Extension of Duration of Demolition Permit

Form 77 - Form to use for a Notice of Performance of Emergency Work

Form 80 - Form to use for Notification of Low Risk Work (building or plumbing)

Factsheet for Building Designers using AMR to work in Tasmania

Factsheet for Building Services Designers using AMR to work in Tasmania

Factsheet for Building Surveyors using AMR to work in Tasmania

Factsheet for Gas-fitters using AMR to work in Tasmania

Factsheet for Motor Vehicle Traders using AMR to work in Tasmania

Factsheet for Plumbers using AMR to work in Tasmania

Factsheet for Security or Investigation Agents using AMR to work in Tasmania

Factsheet for Architects using AMR to work in Tasmania

Factsheet for Automotive Gas-fitters using AMR to work in Tasmania

Factsheet for Electricians using AMR to work in Tasmania

Factsheet for Engineers using AMR to work in Tasmania

Specifies Schedule 1 (plumbing installation use, monitoring, management); and accreditation (Section 18 of the Building Act 2016). Commencement: 12 December 2016

Specifies processes for the Building Administration Fee including calculations, payments, waivers and record keeping. Commencement: 22 July 2019

Specifies processes and requirements for building product accreditation for certain high risk products used in Tasmania. Commencement: 27 December 2017

Specifies types of building and demolition work (low risk, notifiable work, permit work) and who can do the work. Commencement: 12 March 2021

Specifies types of plumbing work (low risk, notifiable work, permit work) and who can do the work. Commencement: 18 August 2022

Specifies the expertise and qualifications for people who provide assessable item certificates as part of Schedule 1 of the Building Act 2016. Commencement: 15 December 2021

Specifies time periods and documents, Schedule 1, Schedule 2 and Schedule 3 under Building Act 2016. Commencement: 8 September 2017

Director's Determination specifying the requirements for new work and exemptions and exceptions from the application of Part H8 of the NCC.

Specifies exemptions for certain buildings, or building classes, from section 53 of the Building Act 2016, which requires an entire building upgrade to the current NCC when building work is performed on more than half the original volume. Commencement: 14 October 2019

Specifies testing, inspection and maintenance frequency of prescribed essential building services. Commencement:1 July 2017

Specifies mandatory contract provisions under the Residential Building Work Contracts and Dispute Resolution Act 2016. Commencement:16 December 2016

Specifies matters in relation to the appointment of mediators and the mediation of residential building work disputes under the Residential Building Work Contracts and Dispute Resolution Act 2016. Commencement: 1 July 2024

Notice of Dispute document under Residential Building Work Contracts and Dispute Resolution Act 2016

Certificate of Mediation Outcome - Resolved document under Residential Building Work Contracts and Dispute Resolution Act 2016

Certificate of Mediation Outcome - Not Resolved document under Residential Building Work Contracts and Dispute Resolution Act 2016

Building Dispute Terms of Mediated Settlement document under Residential Building Work Contracts and Dispute Resolution Act 2016

Specifies when an owner must perform protection work required under the Building Act 2016 - v1.1 October 2018. Commencement: 15 October 2018

Specifies the process for making referrals to Function Control Authorities. Commencement: 5 December 2016

Specifies additional requirements and obligations for premises used for short or medium term visitor accommodation. Commencement: 1 July 2018

Director's Determination - Special circumstances when expired approvals may be accepted. Commencement: 15 August 2019

Specifies special fire hazard materials for certain premises under the Building Act 2016. Commencement: 12 December 2016

Specifies requirements for grant a temporary occupancy permit, when a permit can be refused, technical standards and use/maintenance of temporary structures. Commencement: 5 December 2018

Specifies types of low risk work in bushfire-prone areas considered notifiable work and subject to specific controls. Commenced:  12 April 2021

Specifies requirements for building or demolition work in bushfire-prone areas after certain provisions of the Tasmanian Planning Scheme have commenced. Commenced: 16 July 2024

Specifies requirements for building or demolition work in coastal erosion hazard areas. Commenced:  12 April 2021

Specifies requirements for building or demolition work in coastal inundation (flood) hazard areas. Commenced: 12 April  2021

Specifies requirements for building or demolition work in landslip hazard areas. Commenced:  12 April 2021

Specifies requirements for building and demolition work in riverine inundation (flood) hazard areas. Commenced:  12 April 2021

Specifies transitional requirements for building in bushfire-prone areas. Commenced: 16 July 2024

Certificate of Accreditation - On-site Waste Water Management System, Waterless Composting Toilet System Models CM8, CM10, CM14, CM20, CM40 and CM60, Clivus Multrum Treatment System, Manufactured by BICO Pty Ltd, trading as Clivus Multrum Australia

Accreditation Certificate for the Eljen A42 GSF sand filter with full liner, associated septic tank and pump chamber

Certificate of Accreditation - Kiel Industries P/L - Rota Loo RL650 and RL950 Waterless Composting Toilet System

Certificate of Accreditation for Green Loo GT120 and GT 330 waterless composting toilet system

CBOS approved Certificate of Accreditation for EnviroTas 10ANR aerated waste water treatment system

CBOS approved Certificate of Accreditation for Econocycle Eco Pro Concrete (10EP) and Poly (10EP)

Certificate of Accreditation - Models CM8, 10,14,20 & 40 - Ecoflo Waste Water Management P/L - Waterless Composting Toilet System

CBOS approved Certificate of Accreditation for Ozzi Kleen RP10 aerated waste water treatment system

CBOS approved Certificate of Accreditation for Fuji Clean ACE 1200 aerated waste water treatment system

Certificate of Accreditation for Green Loo OZ-E-POD (2EP Max) waterless composting toilet system

Certificate of Accreditation for Green Loo GL90 Waterless Composting Toilet system

CBOS approved Certificate of Accreditation for Taylex ABS Concrete 1500 (10EP) and Poly 1500 (10EP) onsite wastewater management system

CBOS approved Certificate of Accreditation for Fuji Clean ACE 3000 aerated waste water treatment system

On site waste water management system

Sets the 'fit and proper' requirement for contractors or practitioners if getting or keeping a licence under the Occupational Licensing Act 2005

Standards of conduct and professionalism expected from building surveyors in Tasmania

Code of Practice classifies what is electrical work and severely defective electrical work

This document will supersede the Electricity Consumption Metering Safety Requirements Tas 2017 which apply to anyone performing electrical work relating to consumption metering.

Commencement date: 2 May 2023

Sets the minimum standards for electrical work; electrical compliance labelling for transportable structures and vehicles; defective electrical work reporting and notification

The COP sets the minimum supervision requirements in the performance of prescribed work (electrical, plumbing, gas-fitting). This document supersedes the Supervision of Prescribed Work Code of Practice 2019.

Code of Practice setting the minimum standards for gas-fitting work in Tasmania

Sets the minimum standards for plumbing work in Tasmania

Supporting checklist to use with the Director's Determination - Categories of building and demolition work

Commonly used approved forms for plumbing work in Tasmania

Index to use with the Director's Determination on Categories of Building and Demolition Work (common work types only)

List of forms approved by the Director of Building Control under the Building Act 2016 and Building Regulations 2016

List of changes to forms approved under the Building Act 2016 and Building Regulations 2016

Supporting document listing changes to the Director's Determination - Categories of building or demolition work

Advisory Note that specifies the electrical work forms and certificates required under the Occupational Licensing Act 2005 that have been approved by the Administrator of Occupational Licensing.

This document provides a list of answers to questions regarding AS/NZS 5033:2021 to ensure a consistent approach across Australia and New Zealand when applying the requirements within the particular Standard.

This document explains restrictions which apply to locations and proximity of equipment to Battery Energy Storage Systems. (BESS)

Electrical Compliance Guide on prefabricated structures in Tasmania

Checklist for the recommended maintenance on solar energy systems

Advisory note published by the Electrical Regulatory Authorities Council (ERAC) on multiple mode inverters (MMI) that are connected to solar and battery systems and the requirements when the stand alone (back-up) supply is operational.

This Regulatory Guide provides information for electrical contractors about what to do when they receive a Notice of Defective Electrical Work.

Information on electrical equipment compliance with the Electrical Equipment Safety System

Statement from the Electrical Regulatory Authorities Council (ERAC) and the Standing Committee of Officials (SCO) of the Electrical Equipment Safety System (EESS) on issues related to DC isolator certification requirements for DC isolators in solar PV inverters incorporating DC isolators.

Information guide on installing solar panels including building and electrical requirements

Template Certificate of Compliance for High Voltage Electrical Work

Information to help electrical contractors and nominated managers comply with Occupational Licensing Act 2005 and Occupational Licensing (Electrical Work) Regulations 2018

Code of Practice that specifies obligations, processes and restrictions regarding the inspection, testing, certification and approval to energise high voltage equipment.

Information on selling second hand electrical items

Regulatory Guide that communicates a statement that solar inverters incorporating DC isolators do not require certification to AS/NZS 4777.2:2020 to be sold or installed in member jurisdictions across Australia until 30 June 2022.

Information on using electricity safely in caravans and tents. Includes connecting caravans to a electricity supply, using supply extension leads and electrical safety for caravan owners.

Electrical Compliance Guide on Solar DC Cables from June 2022

Electrical Compliance Guide on Residual Current Devices (RCDs) - April 2023

Electrical Compliance Guide on Metering Code of Practice FAQs

Information on safety installation requirements for DC connectors in solar installations

Electrical Compliance Guide on Residual Current Devices (RCDs) - March 2023

Information on reporting requirements for unsafe electrical installations

PVC Pipe and Fittings - Solvent Weld Jointing v1.1 - Plumbing Standards Advisory Note

Water Services - Plastic Pipes and Fittings - Plumbing Regulation Advisory Note

This Regulatory Note is intended to provide guidance to Permit Authorities and certifying plumbers in relation to the relevant and appropriate approvals process for prefabricated buildings, and to clarify the definition of an unregistrable relocatable building.

Regulatory Note - Bidet douche seats - backflow prevention requirements

Technical note - Handheld douche wand and trigger spray hose assemblies – Backflow prevention requirements

This Regulatory Note provides guidance on the building and plumbing regulatory requirements for the use of 'Tiny Houses' and road registrable vehicles for accommodation purposes.

Example for Schedule 1 Single Storey design in Tasmania. This is an example only.

Example for Schedule 1 Two Storey design in Tasmania. This is an example only.

Example for Schedule 3 Plan As Constructed design in Tasmania. This is an example only.

Information on the Building Act 2016 and the changes to the building approval process

Outlines the transitional laws relating to building in bushfire, landslip and flood prone areas still apply under the former Building Act 2000 and Building Regulations 2014.

Information on how the change for Tasmanian building practitioners from being licensed to being accredited

Information on requirements changes when building in areas which are subject to natural hazards

Fact sheet for Local Government and Building Industry Stakeholders on changes made by the Residential Building (Miscellaneous Consumer Protection Amendments) Act 2023

Information on changes to the Building Regulations 2016 including high risk building products, low risk building work, reporting authorities, maintenance records on essential building services, building permits in bushfire prone areas and occupancy permits for farm sheds

Checklist for building work approval process in Tasmania. Information to help owners understand their responsibilities before, during and after building works.

Information on condensation controls (insulation and ventilation) in roofs

Information on construction and approval standard for 'Stand By' gas systems on natural gas installations

Information for consumers on what you can build without a building permit

Information on electrical equipment compliance with the Electrical Equipment Safety System

Information on changes to the annual assessment and displaying Form 56 requirement as well as creating a maintenance schedule

Information on expired building, plumbing and demolition permits in Tasmania

Information to help electrical contractors and nominated managers comply with Occupational Licensing Act 2005 and Occupational Licensing (Electrical Work) Regulations 2018

This fact sheet is intended to help clarify when a temperature control device is required to be installed to a heated water installation.

Explains insurance claims, building repairs and when a contract is needed under the Building Work Contracts and Dispute Resolution Act 2016

Checklist to help owners avoid problems when building low risk work

Information on how to safety transfer greywater using a bucket

Information on the types of owner builder work that can be performed in Tasmania

Information for consumers about fixing your house after flood damage

Explains new restricted drainage endorsement option for building licences in Tasmania

Information on selling second hand electrical items

Information on building sheds in Tasmania

Information on re-using shipping containers as buildings and sheds in Tasmania

Regulatory note outlining the adoption of NatHERS software in Tasmania

This Regulatory Note provides guidance on the building and plumbing regulatory requirements for the use of 'Tiny Houses' and road registrable vehicles for accommodation purposes.

Information on design concepts to make a building more usable for people with a range of disabilities (physical or sensory)

Tasmanian Gas Act 2000 - Annual Report 2017

Tasmanian Gas Act 2000 - Annual Report 2017

Tasmanian Gas Act 2000 - Annual Report 2018

Tasmanian Gas Act 2000 - Annual Report 2018

Tasmanian Gas Act 2000 - Annual Report 2019

Tasmanian Gas Act 2000 - Annual Report 2019

Tasmanian Gas Act 2000 - Annual Report 2020

Tasmanian Gas Act 2000 - Annual Report 2020

Guide to help if you are considering installing buried consumer gas piping and Type A gas appliances in public land

Form - Application for acceptance - complex/prescribed standard gas installation. Must be signed and sent to the Director of Gas Safety 14 days before the proposed commissioning date.

Record of automotive gas fitting work undertaken during a month

Information on how to safely use/ventilate gas in a caravan or campervan

Certification acceptance requirements for fuel gas composition to be used in a biogas or industrial 'off gas' process supplying a gas installation

How to safely use a butane cartridge cooker

Gas Standards and Safety Compliance Guide providing information on the prohibition of sale and supply of open flued gas heaters to apply within Tasmania from 1 December 2022.

Compliance Guide that provides information on the clearances required between rangehoods and exhaust fans installed above domestic gas cooking appliances.

Information on construction and approval standard for 'Stand By' gas systems on natural gas installations

What you need to know about domestic biogas systems

Resource tool - Suggested risk assessment procedure produced by e-systems

A guide to help in the design of biogas facilities, where biogas is collected or conditioned

Brochure on the Tasmanian gas pipeline planning corridor

Information on safely digging near gas pipes - Dial Before You Dig

Hot Tapping Guidelines

Information guide for gas installation and designers about gas appliance air requirements in accordance with AS/NZS 5601.1:2013 Gas installations

Information guide to help gas-fitters understand and meet obligations under Gas Act 2019 and Gas Regulations 2021.

Guide for contractors who intend to use trenchless techniques when installing plastic gas consumer piping systems not exceeding 200 kPa gas supply pressure

A guide for builders, manufacturers and installers of blinds, and anyone renovating an alfresco area or using outdoor gas appliances such as barbeques and patio heaters.

General information for an applicant who is required to prepare a gas safety management system for a complex gas installation

Information on mandatory flame safeguards on domestic cookers in Tasmania

Guide for licensees, gas suppliers and gas practitioners on the meaning of ‘uncontrolled discharge of gas’ and the mandatory reporting requirements associated.

What to do when there is a bushfire and you have a natural gas connected

Information Sheet - Natural gas supply emergencies and converting complex gas installations

How to safely store and use LP Gas at public events

Tasmanian Gas Industry Audit Policy - Gas Safety Act 2019

Form - Application for acceptance for Type B gas appliance. Must be signed and sent to Director of Gas Safety, 14 days before the proposed commissioning date

Commissioned settings checklist for gas appliances in Tasmania

Form - Statement of Compliance - Type B gas appliance. Declaration must be completed on commissioning day. Copies must be sent to: DGS, appliance owner & gas supplier within 48 hours

Information to help you make an informed choice when choosing the best aerated waste water treatment system (AWTS) and contractor to suit your needs

Explains the difference between the Building Administration Fee and the Industry Training Levy

Designers guide to condensation in buildings. This guide must be read in conjunction with the National Construction Code (NCC). All example diagrams in this Guide are diagrammatic only.

Information to provide guidance to plumbing permit authorities and contractors on the installation of charged down pipes on Class 1a & 10 buildings for drinking water purposes.

Information to provide assistance to Building Surveyors relating to the inspection of penetrations of fire rated construction.

Guide for permit authorities on plumbing work inspections

Information to provide assistance to Building Surveyors relating to the inspection of waterproofing of wet areas.

Guidance on extensions to or upgrades of existing buildings to comply with the Building Act 2016, Building Regulations 2016 and the current National Construction Code

Guidance Note on the application of 3 year time frame under the Building Act 2016

Guidelines specifying how on-site waste water management systems can be designed to meet the National Construction Code. Also covers how to determine building works impacting on existing systems

Information guide on the processes for changing building surveyor for an ongoing project

Technical requirements on relocating and re-erecting an existing building on a new site.

This Code applies to early childhood centres and school age care facilities approved under the Education and Care Services National Law (Tasmania) or licensed under the Child Care Act 2001

Advice for plumbers on the correct safety first approach to disconnecting water services when doing alterations and repairs.

These specifications provide requirements the Regulator expects to see in an ESMS. Without including these provisions applicants cannot expect to receive an approval.

This document applies to anyone performing electrical work relating to consumption metering

Revision of disability access information including identification of relevant regulatory documents to use in the design and construction of building

Information guide to help gas-fitters understand and meet obligations under Gas Act 2019 and Gas Regulations 2021.

Information guide on installing solar panels including building and electrical requirements

For use by people whose work is directly affected by the Building Act 2016. This includes local council staff, builders, owner builders, building surveyors, architects, building designers and plumbing certifiers.

Information on the acceptable methods for domestic greywater re-use or recycling in Tasmania

Reference document for acceptable workmanship standards in residential construction in Tasmania. Guide is based on technical standards and industry tolerances to describe what is considered an acceptable standard.

Guideline to help Council General Managers and permit authorities understand their powers relating to dilapidated buildings in Tasmania

Guideline on protection work in Tasmania under the Building Act 2016

A guide for builders, manufacturers and installers of blinds, and anyone renovating an alfresco area or using outdoor gas appliances such as barbeques and patio heaters.

Pipework specifications required for Polyethylene Pipework (PE) when pumping primary treated effluent (black water)

Summary of the deemed-to-satisfy energy efficiency requirements under the National Construction Code for typical home with flat ceiling and pitched roof

Guidelines to be read in conjunction with Director's Determination - Categories of Plumbing Work

Code applies to health service establishments defined in the Health Services Establishments Act 2006.Read this Code in conjunction with the National Construction Code.

A summary of the changes to building legislation - Building (Miscellaneous Amendments) Act 2018

Information on electrical and gas safety in a storm

Hazard alert on certain solar power inverters that can expose the user to hazardous voltage due to the potential of live parts being accessible

Hazard alert regarding LG energy storage systems and ESS batteries or a SolaX X-Cabinet, Power Station or Opal Storage system containing a recalled battery.

Hazard alert on unconnected cables

TasNetworks has become aware of a defect in 100A Michaud Service Fuse Holders at the consumer’s point-of-attachment (POA). While the defective fuse holders do not impact the supply or operation of electrical circuits it can pose a risk to those working in close proximity.

Hazard alert on the charging of Lithium batteries; including those used in equipment such as electric scooters, bikes, hover boards and similar.

Hazard alert with information on gas and electricity safety for flood affected properties.

Hazard alert regarding the use of adaptors to allow after-market generic batteries to fit different products, particularly battery
chargers.

Hazard alert on the use of both commercial and domestic tumble dryers to dry items exposed to cooking fats and oils which can result in a fire

Hazard Alert on the detrimental effects on gas flued appliances when installing mechanical ventilation such as exhaust fans or range hoods

Hazard Alert informing of the dangers of cable insulation which has deteriorated exposing live conductors.

Hazard Alert for electricians on installation hazards with polarity sensitive RCBOs

Form to complete when doing work for no payment (gratuitous) plumbing and gas-fitting work in Tasmania

Guide to applying, renewing and changing occupational licensing services online in Tasmania.

Referee statement form used as part of a building services provider licence application in Tasmania

Form used as part of a building services provider licence application in Tasmania

Form used as part of a building services provider licence application in Tasmania

Determination under the Occupational Licensing Act 2005 specifying the approved training courses or competencies required to issue a licence, perform prescribed work or work under an exemption order for electricians, plumbers, gas-fitters and auto gas-fitters. Commenced: 14 November 2017

Determination under the Occupational Licensing Act 2005 establishing requirements for licensed practitioners to perform Continuing Professional Development, including number of points required to be achieved, and what are appropriate training or learning activities.  (It does not apply to licensed building services providers). Commenced: 19 December 2018

Determination under the Occupational Licensing Act 2005 establishing electrical licence classes, their scope of work and minimum qualifications for a licence. Commenced: 7 December 2016

Determination under the Occupational Licensing Act 2005 establishing eligibility requirements for nominated managers of plumbing contractor’s businesses. Commenced: 8 August 2011

Determination under the Occupational Licensing Act 2005 establishing transitional provisions to enable a gas-fitter, licensed under the former Plumbers and Gas-fitters Registration Act 1951, who doesn't have a current a current gas installations/storage systems - boats and caravans (LPG) to apply for an endorsement for this work. Commenced: 22 August 2017

Determination under the Occupational Licensing Act 2005 establishing gas-fitting licence classes, their scope of work and minimum qualifications for a licence. Commenced: 7 December 2016

Determination under the Occupational Licensing Act 2005 establishing licence requirements (full or restricted) to install, service, repair gas fuel systems in motor vehicles, forklifts, mobile industrial equipment, and reciprocating stationary engines using LPG, CNG, LNG, NG or Biogas. Commenced: 7 December 2016

Determination under the Occupational Licensing Act 2005 establishing the requirements for the demonstration of competence of persons applying for any class of plumbing licence Commences: 17 July 2024

Determination under the Occupational Licensing Act 2005 establishing the requirements for Building Services Providers and owner builder permits. Includes minimum qualifications needed for a licence or permit; licence classes and their scope of work, insurance; licensing of business entities, Continuing Professional Development and Codes of Practice for licensees. Commences: 1 January 2022

Determination under the Occupational Licensing Act 2005 establishing plumbing work licence classes; licence requirements; continuing competencies; scope of work relating to each plumbing licence class; licence conditions and endorsements. Commenced: 8 May 2018

Determination under the Occupational Licensing Act 2005 specifying requirements for licensed builders, applying for an endorsement to perform restricted roof drainage work that is a consequential or necessary component of associated building work. Commenced: 4 July 2018

Determination under the Occupational Licensing Act 2005 specifying the time limit to apply for a licence. Commenced: 23 December 2008

Notice statement the commencement date (8 Nov 2017) for AS/NZS 3010:2017 Electrical Installations - Generating Sets

Sets the commencement date (1 Jan 2019) for AS/NZS 3000:2018 Electrical installations (known as the Wiring Rules)

Provides notice that Amendment 2 of the Australian and New Zealand Standard, AS/NZS 3000:2018 Electrical Installations “Wiring Rules”, published on the 30th day of April 2021, shall commence in the State of Tasmania on the 1st day of November 2021.

Notice that Australian and New Zealand Standard, AS/NZS 3001:2022 Electrical installations – Connectable electrical installations and supply arrangements, parts 1 and 2, published on the 18th day of November 2022, shall commence in the State of Tasmania on the 20th day of November 2023.

Provides notice that Australian and New Zealand Standard, AS/NZS 3002:2021 Electrical installations – Shows, carnivals and events published on the 25th day of June 2021, shall commence in the State of Tasmania on the 1st day of January 2022.

Provides notice that Australian and New Zealand Standard, AS/NZS 5033:2021 Installation and safety requirements for photovoltaic (PV) arrays, published on the 19th day of November 2021, shall commence in the State of Tasmania on the 1st day of June 2022.

Specifies the insurance required to be held by licence holders under the Occupational Licensing Act 2005

Order that determines and clarifies that certain owners are exempted from holding a builder licence, or an owner builder permit, for erecting Class 7b farm sheds.

Exemption of TechSafe from holding a contractor licence in Tasmania for the purposes of performing their inspection duties

Exempting a trade's assistant from being required to hold a practitioner's licence if Clause 5 is met

Exempts a person, who carries out electrical work in accordance with clauses 8, 9, 10, 11, 12 and 13 of this Order, from having to hold a practitioner licence

Sets minimum requirements and conditions for specific gas-fitting work activities, which are exempt from having to hold a gas-fitting practitioner licence. Replaces Occupational Licensing (Gas-fitting Exemption) Order 2010 which is revoked.

Order determining persons (overseas-based and specifically trained as auto gas-fitters, or their assistants) exempt from holding a licence for performing gas-fitting work on stationary reciprocating engines - specified circumstances and equipment apply. Replaces 2013 Exemption Order (RD009)

Exempts specified plumber practitioners; plumber practitioners (restricted, certifier, certifier restricted) from having to be licensed until a specified date

Exempts contractors, and classes of plumbing licence holders who are doing medical gas work, from being required to be licensed until a date determined by the Administrator of Occupational Licensing

Order to exempt specified prescribed plumbing work, occupations, classes and specified persons

An Order that determines that licensed electrical practitioners engaged to perform solar panel installations which are Notifiable Building Work or Permit Building Work are exempt from the requirement to hold a licence as a building designer to perform the associated solar panel site plan design work for the panel installation.

Safety Warning Notice for caravan owners, agents and manufacturers and the risk with LP gas on some water heater models.